Metrel MI 3125 Combination Multifunction Tester
Metrel MI 3125 Combination Multifunction Tester
SKU:MET03125
Couldn't load pickup availability
Overview
The Metrel Installation Tester is designed for compliance testing to the AS/NZ3000 standard. This multifunctional device is suitable for testing appliances and installations, combining the capabilities of 12 instruments into one highly specified tester. Specifically built to meet Australian standards, it provides the ultimate all-in-one testing solution.
Clever accessories, such as the optional 3-phase adaptor kit, allow for easy deployment of the tester in various environments. An optional resistor box (not included) can be connected to the switchboard during installation testing, eliminating the need for lengthy trailing earth leads during outlet socket testing. Built-in thresholds deliver clear results with PASS/FAIL indications in accordance with AS3000 specifications, similar to an appliance tester.
Single Measurement Functions
- Voltage
- Frequency
- Phase rotation
- Resistance to earth connection and equipotential bonding
- Insulation Resistance
- Polarity
- Correct Circuit Connections
- Fault Loop Impedance/PSC
- RCD Test (including ramp current testing)
Insulation Resistance
Nominal Voltages: 50V, 100V & 250V DC
| Measuring Range (MΩ) | Resolution (MΩ) | Accuracy |
|---|---|---|
| 0.00 ... 19.99 | 0.01 | +(5% of reading + 3 digits) |
| 20.0 ... 99.9 | 0.1 | +(10% of reading) |
| 100.0 ... 199.9 | 0.1 | +(20% of reading) |
Insulation Resistance: 500V and 1000V DC
| Measuring Range (MΩ) | Resolution (MΩ) | Accuracy |
|---|---|---|
| 0.00 ... 19.99 | 0.01 | +(5% of reading + 3 digits) |
| 20.0 ... 199.9 | 0.1 | +(5% of reading) |
| 200.0 ... 999 | 1 | +(10% of reading) |
Voltage
Measuring Range
| Measuring Range (V) | Resolution (V) | Accuracy |
|---|---|---|
| 0 ... 1200 | 1 | +(3% of reading + 3 digits) |
Resistance (R LOWΩ)
Measuring Range
| Measuring Range (Ω) | Resolution (Ω) | Accuracy |
|---|---|---|
| 0.00 ... 19.99 | 0.01 | +(3% of reading + 3 digits) |
| 20.0 ... 199.9 | 0.1 | +(5% of reading) |
| 200.0 ... 1999 | 1 | +(5% of reading) |
RCD Testing
General Data
- Nominal residual current (A, AC): 10mA, 30mA, 100mA, 300mA, 500mA, 1000mA
- Nominal residual current accuracy: +5%
- Test current shape: sine-wave (AC), pulsed (A)
- RCD Type: G (non-delayed), S (time-delayed)
- Test current starting polarity: 0° or 180°
- Voltage range: 50V ... 264V (45Hz ... 65Hz)
Trip-out Time
| Measuring Range (ms) | Resolution (ms) | Accuracy |
|---|---|---|
| 0.0 ... 40.0 | 0.1 | +1ms |
| 0.0 ... max. time | 0.1 | +3ms |
Trip-Out Current
| Measuring Ranges IΔ | Resolution IΔ | Accuracy |
|---|---|---|
| 0.2xIΔN ... 1.1, 1.5, 2.2xIΔN (AC type) | 0.05xIΔN | +0.1xIΔN |
Socket Test (RLN, RLPE, RNPE, RPE)
- Measuring current: min. 200mA into load resistance of 2Ω
Measuring Range
| Measuring Range (Ω) | Resolution (Ω) | Accuracy |
|---|---|---|
| 0.00 ... 19.99 | 0.01 | +(3% of reading + 3 digits) |
| 20.0 ... 199.9 | 0.1 | +(5% of reading) |
| 200.0 ... 1999 | 1 | +(5% of reading) |
Fault Loop Impedance
No RCD and With RCD
| Measuring Range (Ω) | Resolution (Ω) | Accuracy |
|---|---|---|
| 0.00 ... 9.99 | 0.01 | +(5% of reading + 5 digits) |
| 10.0 ... 99.9 | 0.1 | +(5% of reading + 5 digits) |
| 100 ... 999 | 1 | +(10% of reading) |
| 1.00k ... 9.99k | 10 | N/A |
Prospective Fault Current (Calculated Value)
| Measuring Range (A) | Resolution (A) | Accuracy |
|---|---|---|
| 0.00 ... 9.99 | 0.01 | N/A |
| 10.0 ... 99.9 | 0.1 | N/A |
| 100 ... 999 | 1 | N/A |
| 1.00k ... 9.99k | 10 | N/A |
| 10.0k ... 23.0k | N/A | N/A |
Voltage, Frequency & Phase Rotation
Voltage
- Result type: TRUE RMS
- Nominal frequency range: 0Hz, 14Hz ... 500Hz
Measuring Range
| Measuring Range (V) | Resolution (V) | Accuracy |
|---|---|---|
| 0 ... 550 | 1 | +(2% of reading + 2 digits) |
General Data
- Overvoltage Category: 600V CAT III/300V CAT IV
- Protection Degree: IP40
- Display: 128 x 64 dot matrix display with backlight
- Dimensions: 14cm x 8cm x 23cm
- Weight: 1.0kg (without batteries)
- Temperature Range: 0°C to 40°C
- Maximum Humidity: 95% RH
- Power Supply Voltage: 9 V DC (6 x 1.5 rechargeable batteries) - 20 hours operation
Included Accessories
- Neck carrying belt
- Short instruction manual
- Instruction manual
- Calibration certificate
- Mains measuring cable (1.5m)
- Universal test cable (Black, Red, Green test clips)
- 5 x Black alligator clips
- 6 x Rechargeable batteries
- Power supply adaptor
Standard Warranty
1-year warranty for the unit.
BUYING GUIDE
Need help with find the right option?
Our buying guide takes the guess work out of finding the perfect tester for your needs